ZBQ pneumatic Note the pump ZBQ50 / pneumatic injection pump injection pump. 
 Grouting pump pneumatic injection pump ZBQ50 / 6 Air injection pump injection pump price quote mine of injection pump with pneumatic injection pump pneumatic injection pump distributor of pneumatic injection pump distribution injection pump price injection pump manufacturers to sell Monopoly injection pump injection pump. 
 Welcome to the shops of the Shandong coal Iraqi affairs, intimate service in good faith 18,660,761,305 
 Shandong coal production ZBQ pneumatic injection pump is fully functional, safe and practical, can be used in the flammable, explosive, intense radiation, dusty, little temperature change and watering places, simple operation, the most important thing is to ensure the use safety, coal mine accident-prone, many because of machine failure resulting in the quality of our coal production of pneumatic injection pump, easy to operate, to ensure human safety and to ensure the quality of the product. 
 Characteristics: (1), the small size, light weight, mobile handling aspects to adapt to multi-point moves around a grouting. 
 (2) adopts pneumatic transmission, the pump grouting performance require large flow suitable for very low injection pressure, grouting pressure of the working conditions of small flow. 
 (3) the use of pneumatic transmission can also be used in the work environment of flammable, explosive, water spray, dust and large. 
 (4) can be a pump in serous than required is not very strict conditions can be achieved double grouts to greatly reduce the acquisition cost of construction equipment. 
 ZBQ type pneumatic injection pump principle: 
 Compressed air through the valve, air source diad, two five-way valve into the cylinder, drive cylinder piston for reciprocating movement. Due to the cylinder rod and plasma cylinder rod connected to the cylinder piston reciprocating motion at the same time also contributed to the plasma piston for reciprocating movement to complete the suction pulp action. Change from dial mounted on the cylinder rod back and forth to toggle actuator valve, control change to transform cutting the cylinder into the exhaust direction, continuous completion of the reciprocating motion of the piston. 
 ZBQ pneumatic injection pump. 
 (1) double grouts to choose the model of the injection pump, the order stating the two-fluid plasma ratio Note 
 (2) The supply pressure must not be less than 0.6 ~ 0.7Mpa, the gas supply shall not be less than 0.7m3/min 
 The main technical parameters 
 Product Type ZBQ50 / 6 type 
 The basic parameters of the name of the parameter unit 
 Rated flow L / min. 30, 50, 100 
 Rated working pressure Mpa 10,6,3 
 Slurry tank by mm 60,75,100 
 Stroke length mm 120 
 Reciprocating frequency min-1 2-55 
 Supply pressure mpa 0.6 ~ 0.7 
 Adjust the air pressure mpa 0.05 ~ 0.6 
 Cylinder diameter mm 250 
 Ventilation straight through the G1 
 Compressed air consumption m3/min ≤ 0.7 
 Matching motor power KW 
 Supporting motor model 
 Weight (KG) 60 
 Dimensions (L × W × H) mm 1000 × 504 × 645 
 The quality of survival, reputation and development, Shandong coal standing proudly in the pack. 

 Contact Person: Iraq's political Mobile: 18660761305 Tel :0537 - 2.39869 million 
 Fax; 0537-2358836 QQ: 2693635953 E-mail: zhongmei3289@163.com